GG adapters

From GG Wiki
Jump to: navigation, search
GGWikiLogo-400x400px-0000-0030-0000-0040-0000-0050-0000-00060.png

Connecting iAtty, Odysseus or Penelope on a GGTS



WARNING: If you are here because of a link you found in a site that sells e-cigs, you have to know that these sites sells fake GG series and you are sold down the river. If you really want to have the real deal then please check The Golden Greek forum here:

Or ask a question to one of the Golden Greek authorized sellers:



IMPORANT NOTE: A new GG original adapter has been made by Imeo for this purpose, and

it is the recommended and official method to connect tanks and fat atomizers to the GGTS.


Please take a look at the following video:


     
The GGTS Adapter (picture by COV).




Thanks to Ariel_MX


This guide shows 5 ways to connect a GG rebuildable atomizer with 510 base / connector or any other tank with 510 connector on a GGTS.


Adapter overview.jpg

Adapters used in this guide:

From left to right:

901battery -> 808-D Atomizer
901-510
510-510 (shortie)
510-510
901-510
GGTS 510 -> 901 re-threader




Without Airflow Control



Method 1

Adapters used*:

Shortie 510 - 510

Normal 510 - 510

510-510 510-510 shortie.jpg


*Adapters installed on the GGTS connector.


Results:

510-510 510-510 shortie result-2.jpg

510-510 510-510 shortie result.jpg
Atomizer tank won't sit flush on top, airflow control will not work with this method.
Connector Pin significantly protuberant.



Method 2:

Adapters used*:

510 - 901 rethreader1


901 - 510


Shortie 510 - 510

GGTS 510-901rethreader 901-510 510-510 shortie.jpg


*Adapters installed on the GGTS connector.

1 Included with GGTS.


Results:

GGTS 510-901rethreader 901-510 510-510 shortie result-2.jpg

GGTS 510-901rethreader 901-510 510-510 shortie result-1.jpg

Atomizer tank won't sit flush on top, airflow control will not work with this method.
Connector Pin less protuberant than method 1.



With Airflow Control



Method 3

Adapters used*:

510 - 901

901 - 510



510-901 901-510.jpg


*Adapters installed on the GGTS connector.

Results:

510-901 901-510 result-2.jpg 510-901 901-510 result-1.jpg
Atomizer tank will sit flush on top, airflow control will work fine.
Connector Pin significantly protuberant.



Method 4

Adapters used*:

510 - 901 rethreader1


901 - 510

GGTS 510-901rethreader 901-510.jpg


*Adapters installed on the GGTS connector.

1Included with GGTS.


Results:

GGTS 510-901rethreader 901-510 results-2.jpg GGTS 510-901rethreader 901-510 results-1.jpg

Use without the Collector Tank Draw Cap (brass part on pictures).

Atomizer tank will sit flush on top, airflow control will work fine.

Notice the Connector Pin resultant lenght.

This method keeps the GGTS total length to a minimum.

  


Method 5

Adapters used*:

510 - 901 rethreader1


901 - 808


901 - 510

GGTS 510-901rethreader 901-808 901-510.jpg


*Adapters installed on the GGTS connector.

1Included with GGTS.


Results:

GGTS 510-901rethreader 901-808 901-510 results-2.jpg GGTS 510-901rethreader 901-808 901-510 results-1.jpg

Atomizer tank will sit flush on top, airflow control will work fine.

If you wanna keep the GGTS original look (Collector Tank Draw Cap installed) this is the prefered method.

Notice the Connector Pin resultant lenght.

   

The 901 - 808 adapter.
901-808adapter.jpg


SsGGTS 18350battery iAtty.jpg
iAtty on ss GGTS with AW IMR 18350 battery, method 5.




Example (step by step method 5):


GGTSAdaptersMethod5-1.jpg
GGTSAdaptersMethod5-2.jpg
GGTSAdaptersMethod5-3.jpg

2 Adapters, GGTS rethreader and GGTS connector unassembled.

The 901 - 510 and 901 - 808 adapters.

From bottom to top:

GGTS rethreader

901 - 808

901 - 510



GGTSAdaptersMethod5-4.jpg
GGTSAdaptersMethod5-5.jpg
GGTSAdaptersMethod5-6.jpg

From left to right:

GGTS rethreader

901 - 808

901 - 510

Top view of the 901 - 808 adapter.

First screw the GGTS rethreader in the GGTS connector.



GGTSAdaptersMethod5-7.jpg
GGTSAdaptersMethod5-8.jpg
GGTSAdaptersMethod5-9.jpg

GGTS rethreader in the GGTS connector.

Then screw the 901 - 808 adapter on the GGTS rethreader.

GGTS rethreader and 901 - 808 adapter installed on GGTS connector.



GGTSAdaptersMethod5-10.jpg
GGTSAdaptersMethod5-11.jpg
GGTSAdaptersMethod5-12.jpg

Screw the 901 - 510 adapter on the 901 - 808 adapter:

From bottom to top:

GGTS connector.

GGTS rethreader.

901 - 808 adapter.

901 - 510 adapter.

Assemble the GGTS connector:

From bottom to top:

GGTS connector.

Collector cup.

Air flow control ring.

 Install the GGTS 901 / 510 top lid (brass cap on the picture).

You may need to unscrew just a little the brass cap.


GGTSAdaptersMethod5-13.jpg
GGTSAdaptersMethod5-14.jpg
GGTSAdaptersMethod5-15.jpg

GGTS Connector pin view.

Notice the connector pin lenght.

The 901 - 808 (bottom) and 901 - 510 (top) adapters.

GGTS full connector assembled + iAtty.

(stainless steel top lid).


GGTSAdaptersMethod5-16.jpg
GGTSAdaptersMethod5-19.jpg
GGTSAdaptersMethod5-20.jpg

Close-up: GGTS full connector assembled (brass top lid) + iAtty.

GGTS connector assembled (stainless steel top lid) + Odysseus.

Close-up: GGTS full connector assembled (stainless steel top lid) + Odysseus.


GGTSAdaptersMethod5-17.jpg
GGTSAdaptersMethod5-18.jpg

Method 4 example:

You can use the 510 - 901 rethreader (included with GGTS) and a 901 - 510 adapter, without the top lid installed.

Method 4 example:

Close-up: GGTS full connector assembled without the top lid + iAtty.




See Also

Golden Greek

Penelope

Odysseus

IAtty